 |
| PT Wijaya Karya (Persero) Tbk / wika.co.id |
PT Wijaya Karya (Persero) Tbk was first established in 1960 as Perusahaan Negara Bangunan Widjaja Karja (PN Widjaja Karja) with principal business in the electrical, water pipe installation. Later in 1972, PN Widjaja Karja renamed into PT Wijaya Karya. PT Wijaya Karya (Persero) Tbk is a public-listed company and its shares are listed on the Indonesia Stock Exchange (IDX) since 2007 under reference code WIKA. As of December 2017, PT Wijaya Karya (Persero) Tbk is 65.05% owned by the Government of Indonesia and 34.95% by general public and investors.
According to information found in PT Wijaya Karya (Persero) Annual Report 2017 as cited by JobsCDC.com, the financial performance of PT Wijaya Karya (Persero) Tbk in the business year of 2017 (ended in 31 December 2017) showed a good improvement. PT Wijaya Karya (Persero) Tbk booked total net sales of Rp26.18 trillion in 2017. This total net sales is up 67.06% from Rp 15.67 trillion in 2016. PT Wijaya Karya (Persero) Tbk successfully recorded a total asset of Rp 45.68 trillion, with a noticeable increase of 45.70% from Rp 31.35 trillion in 2016.
In line with its continued expansion program, PT Wijaya Karya (Persero) Tbk Dept Industrial Plant are now seeking to recruit high caliber and dynamic individuals for the following challenging positions as :
Structural Engineer / Civil Engineer (Code :CVL)
Requirements
- Holds around 3-10 years of engineering experience in EPC.
- Expertise with Staad Pro and other Civil Softwares.
- Strong understanding of structure calculation and basic geotechnical and other civil engineering.
- Willing to be assigned at Head Office and Project Site.
Requirements
- Holds around 3-10 years of engineering experience in EPC.
- Expertise with Plaxis/Geoslope and other Civil Software.
- Strong understanding of structure calculation and basic geotechnical and other civil engineering.
- Willing to be assigned at Head Office and Project Site.
Requirements
- S1 degree in Power Lines.
- Holds around 7-10 years of engineering experience in EPC.
- Fluent in English, both oral and written.
- Expertise with Electrical Software; such as ETAP, Dialux, Chalmlite and others.
- Skilled in operating drawing software; such as AutoCAD.
- Strong understanding of power system design calculation and other electricity design.
- Able to read schematic diagram.
- Willing to be assigned at Head Office and Project Site.
Requirements
- S1 degree in Power Lines.
- Holds minimum 3 years of engineering experience in EPC.
- Fluent in English, both oral and written.
- Expertise with Electrical Software; such as ETAP.
- Skilled in operating drawing software; such as AutoCAD.
- Strong understanding of power system design calculation and other electricity design.
- Willing to be assigned at Head Office and Project Site.
Requirements
- Holds around 3-10 years of engineering experience in EPC.
- Expertise with AutoCAD, Caesar II and other piping Software.
- Strong understanding about the calculation of Wall Thickness Calculation, Flexibility Analysis.
- Willing to be assigned at Head Office and Project Site.
Requirements
- Holds around 3-10 years of experience in Subsea and Onshore Pipeline.
- Expertise with AutoCAD, Caesar II and other pipeline Software.
- Strong understanding about the calculation of Wall Thickness Calculation, on bottom analysis, free span, installation analysis, Flexibility Analysis.
- Have a good understanding of design, construction, onshore pipeline operation and offshore pipeline.
- Willing to be assigned at Head Office and Project Site.
Requirements
- Holds around 3-10 years of experience as Piping Designer EPC.
- Expertise with AutoCAD (2D and 3D), Cadwork.
- Strong understanding about the development process for plot plan, piping general arrangement, Isometric, Piping Layout, Detail and Standard Drawing.
- Willing to be assigned at Head Office and Project Site.
Requirements
- S1 degree in Physics Engineering, Electrical Engineering, Physics Instrumentation.
- Minimum 5 years of experience in Project Industrial Plant /' Smelter.
- Familiar and able to provide input and review towards P&ID.
- Have involved in FEED, DEED up to Construction, Commissioning and Start-Up.
- Familiar with international Engineering Code and Standard in the field of Instrument and Control.
- Skilled in operating instrument softwares, such as SPI or Instrucalc.
- Have experience in site supervison.
Requirements
- S1 degree in Physics Engineering, Electrical Engineering, Physics Instrumentation.
- Holds around 3 - 5 years of experience or involved in 1 full EPC Project (Phase DED, Construction, Commissioning and Start-Up) both oil and gas and industrial plant.
- Familiar and able to provide input and review towards P&ID.
- Familiar with international Engineering Code and Standard in the field of Instrument and Control.
- Skilled in operating instrument software, such as SPI or Instrucalc.
- Have experience in site supervision.
Requirements
- Holds around 3-10 years of experience as instrument Designer EPC.
- Expertise with AutoCAD (2D and 3D), Cadwork.
- Strong understanding about the process for 3D and 2D development tray routing, instrument plotplant.
- Able to calculate the MTO Instrument bulk materials.
- Able to develop drawing instrument (location plant, detail installation drawing, cable routing, hook up, etc).
Requirements
- Holds around 1-3 years of experience as Commissioning Engineering in EPC company.
- S1 degree in Chemical Engineering, Mechanical Engineering, Electrical Engineering, Physics Engineering.
- Maximum age of 27 years old.
- Able to work under pressure.
- Willing to work full time.
- Strong communication skill, both oral and written.
- Able to work in a team.
- Strong sense of analytical thinking.
- Eager to learn.
- Willing to be assigned at Head Office and all WIKA's project sites.
Requirements
- S1 degree in Mechanical Engineering.
- Holds around 3-5 years of experience in the related field, preferably have experience in Project Industrial Plant / Smelter.
- Strong understanding of mechanical engineering work in the field of EPC.
- Familiar and able to understanding of PFD and PID Diagram.
- Experience in review document vendor.
- Familiar with mechanical equipment, such as tank, pump, compressor, heat exchanger, etc.
- Familiar with International Engineering Code and Standard in the field of Mechanical/
- Familiar with mechanical software, such as Ame Tank, PV Elit and Helix.
- Willing to be assigned at Head Office and Project Site.
Requirements
- Holds around 2-8 years of experience as drafter mechanical.
- Expertise with AutoCAD 2D, preferably 3D.
- Preferably experienced in develop the image of tank, conveyor, ducting and familiar with its terms.
- Able to work quick and precise.
- Willing to be assigned at Head Office and Project Site.
Requirements
- Minimum 2 years of experience in the same field on EPC project.
- Operating knowledge of CAD software (AutoCAD, etc).
- Experience in heavy lift and heavy transport.
- Able to check the appropriateness of lifting equipment.
- Willing to be assigned at Head Office and Project Site.
Requirements
- Minimum 2 years of experience in the same field on EPC project.
- Able to create civil work methods.
- Strong understanding about the basic civil calculation, both Geo technical or Structure.
- Able to create and translate shop drawing.
- Able to create development, analysis and production report of civil works.
- Willing to be assigned at Head Office and Project Site.
Requirements
- Minimum 2 years of experience in the same field on EPC project.
- Able to create piping work methods.
- Able to create test pack and translate the isometric.
- Able to create development, analysis and production report of piping works.
- Willing to be assigned at Head Office and Project Site.
Requirements
- Minimum 2 years of experience in the same field on EPC project.
- Able to create mechanical work methods.
- Strong understanding of eligibility requirements for mechanical equipment (tank API650, etc).
- Able to create development, analysis and production report of mechanical works.
- Willing to be assigned at Head Office and Project Site.
For more detail information about the program, please refer official source from WIKA on following link below. To apply for this opportunity, please send your updated application and CV not later than 7 October 2018 to andik.s@wika.co.id. Other inquiry, feel free to contact Mr Andik Saputra at 081252513837. All applications will be handled in strictly confidential and only short-listed candidates that match to the requirements and qualifications will be notified. (JobsCDC.com / Source)
from Lowongan Kerja Terbaru Oktober 2018 | BUMN CPNS 2018 https://ift.tt/2Omedsv
via Lowongan Kerja Terbaru PT Wijaya Karya (Persero) Tbk - Engineer Industrial Plant WIKA October 2018 - Hallo sahabat Lowongan Kerja Terbaru Bulan Januari 2017, Pada Lowongan yang anda baca kali ini dengan judul PT Wijaya Karya (Persero) Tbk - Engineer Industrial Plant WIKA October 2018, kami telah memberikan lowongan terbaru ini dengan baik untuk anda lihat dan ambil informasi didalamnya. mudah-mudahan informasi Lowongan Kerja Terbaru Hari Ini Lowongan Lowongan Kerja Terbaru, Lowongan Lowongan Kerja Terbaru Oktober 2018 | BUMN CPNS 2018, yang kami tulis ini dapat anda pahami. baiklah, selamat membaca.
Judul : PT Wijaya Karya (Persero) Tbk - Engineer Industrial Plant WIKA October 2018
link : PT Wijaya Karya (Persero) Tbk - Engineer Industrial Plant WIKA October 2018
PT Wijaya Karya (Persero) Tbk - Engineer Industrial Plant WIKA October 2018
Demikianlah Informasi PT Wijaya Karya (Persero) Tbk - Engineer Industrial Plant WIKA October 2018
Sekianlah Informasi PT Wijaya Karya (Persero) Tbk - Engineer Industrial Plant WIKA October 2018 kali ini, mudah-mudahan bisa memberi manfaat untuk anda semua.
Anda sekarang membaca Informasi PT Wijaya Karya (Persero) Tbk - Engineer Industrial Plant WIKA October 2018 dengan alamat link https://cariloker-dot.blogspot.com/2018/10/pt-wijaya-karya-persero-tbk-engineer.html
Tidak ada komentar:
Posting Komentar